Subject to modification! Updated 06/2017
127
EN
G
ener
al
Inst
all
atio
n
Plug in the connection (jumper) on the back of the battery
charger at the right (into the upper socket).
Plug in the cable (from the inverter, coming from above)
into the lower socket of the battery charger at the right.
Push in both battery chargers all the way until they snap
into place.
Make sure that the cables are not pinched.
Installing the battery module
Remove the ID label (Figure 7) affixed to the top of the
battery module.
Place the battery module into the storage unit enclosure as
shown in Figure 4: .
Figure 7: ID label of the battery module (example)