126
Subject to modification! Updated 06/2017
Adding the battery charger at the right
Remove the cover from the compartment to the right.
Slacken the battery charger at the left and pull it forward a
few cm. Do not detach the existing cabling on the front.
Make sure that the cables are not strained
Remove the cable from the back of the battery charger at
the left.
Guide this cable behind the partition wall in the
compartment to the right.
Plug in the connection (jumper) on the back of the battery
charger at the left (into the upper socket).
Figure 6: Module compartment for expansion to element 6/9/12
1
Jumper to battery charger at the left
2
Connection to inverter
Place the additional battery charger into the compartment
at the right.
Do not push in all the way initially.