6
NOTE: Shortly after the controller is turned off a single digit on the scoreboard will begin to flash an
“8” and will continue to do so until power to the scoreboard has been shut off at the scoreboard's
power disconnect switch or circuit breaker. This feature serves as a reminder to turn off the power to
the scoreboard after each use. Failure to turn off the power to the scoreboard after use could
increase the chances of equipment failure.
USING THE OPTIONS MENU
CHANGING SPORT CONFIGURATION:
Access the option menu by pressing RESET quickly followed by OPTION. Once you have placed
the controller in the Options Menu, the controller’s LCD should display SELECT OPTION on the
top line and <SELECT GAME> on the second line. For this scoreboard, football, baseball, and
soccer are the available sports.
•
Use either the up or down arrow key to select the game mode you wish to score then press
ENTER.
NOTE: Selecting a sport that your scoreboard model is not intended to score may
cause unpredictable results.
CHANGING GAME SETTINGS (Overview):
Access the option menu by pressing RESET quickly followed by OPTION. Notice the bottom line of
text on the LCD Display. Make sure the controller is in the game mode that you wish to set options
for.
1. At the <SELECT GAME> prompt, press ENTER.
2. Use either the up or down arrow key to select the options that are available.
3. Now, the bottom line on the LCD displays the current game mode. If the settings for the current
game mode are what you want to edit, press ENTER.
4. If you are changing game modes, scroll to the game mode of choice and press ENTER.
The options that are available for the selected game mode are shown on the bottom line of text of the
LCD display.
1. By using the up or down arrows, scroll to the setting you want to change and press ENTER.
2. If the option you are adjusting is time related; such as the game clock, enter the new time with
a four digit entry. Here are two examples;
i. Eight minutes – 0800
ii. Twelve minutes – 1200
3. Other than time related options, to adjust the selected option or to turn on or off the selected
function, use the up and down arrow keys and then press ENTER.
4. To select and set other options follow the steps above until all desired options have been set,
then press OPTION to exit the option menu.
