VARSITY Scoreboards 3315 Installation Manual Download Page 8

8

PRODUCT SPECIFICATIONS

CONSTRUCTION

22-gauge galvanneal steel cabinet with powder coat finish for strength,

durability, and lasting appearance

INSTALLATION RECOMMENDATIONS

We recommend this model to be installed between (2) 8” steel I-beams 

(W8 x 21). 

Total length determined by local codes, customer preferred mounting 

height, and scoreboard options. Concrete Footer depth /diameter as 

well as pole/concrete specifications must be based on customer’s local 

building codes, soil conditions, and wind loads. Flat Stock mounting 

brackets and bolts are supplied.  

Support structure and mounting hardware supplied by installer/others.

OVERALL DIMENSIONS

16’ L x 5’ W x 8” D - shipped in two (2) sections 

WEIGHT

Hanging weight = approximately 490 lbs 

Shipping weight = approximately 5

55

 lbs

POWER REQUIREMENTS

SCOREBOARD

(1) 20-amp, 120-volt, 60-hertz, grounded AC circuit, disconnect switch at the scoreboard is

recommended. Specific power requirement information is also marked on the scoreboard’s serial

number label, located on the scoreboard. Power consumption is 72 watts.

LCD WIRELESS KEYBOARD CONTROLLER

(1) 12-volt adaptor in a standard 120V outlet to charge the controller

NOTE: To maintain the life of the LCD controller, in between games or seasons, store the keyboard in 

a place where you can keep the adapter plugged in year-round, helping regulate the battery voltage.

Summary of Contents for 3315

















Reviews: