background image

 

POWXQG4070

 

EN 

Copyright © 2014 VARO 

P a g e

 | 

19

 

www.varo.com 

has low 
power. 

Dirty spark arrestor screen. 
Dirty air filter. 
Incorrect carburetor mixture 
adjustment setting service dealer. 

Replace spark arrestor screen. 
Remove, clean and reinstall filter. 
Have carburetor adjusted by an 
authorized service center. 

Engine 
hesitates. 

Incorrect carburetor mixture 
adjustment setting. 
Air filter is plugged. 
Old or improperly mixed fuel. 

Have carburetor adjusted by an 
authorized service center. 
Replace or clean the air filter.  
Drain gas tank/add fresh fuel mixture. 

No power 
under load. 

Incorrect carburetor mixture 
adjustment setting. 
Old or improperly mixed fuel. 
Air filter is plugged. 
Fouled spark plug. 

Have carburetor adjusted by an 
authorized service center. 
Drain gas tank (see storage)/add fresh 
fuel mixture. 
Replace or clean the air filter. 
Replace or clean the spark plug. 

Runs 
erratically. 

Incorrectly gapped spark plug. 
Plugged spark arrestor. 
Dirty air filter.  

Clean/gap or replace plug. 
Clean or replace spark arrestor. 
Clean or replace air filter. 

Smokes 
excessively. 

Incorrect carburetor mixture 
adjustment setting. 
Incorrect fuel mixture. 

Have carburetor adjusted by an 
authorized service center. 
Use properly mixed fuel (40:1 mixture). 

16  WARRANTY 

 

This product is warranted for a 5-year period effective from the date of purchase by the 
first user. 

 

This warranty covers all material or production flaws excluding : batteries, chargers, 
defective parts subject to normal wear & tear such as bearings, brushes, cables, and 
plugs, or accessories such as drills, drill bits, saw blades, etc. ; damage or defects 
resulting from maltreatment, accidents or alterations; nor the cost of transportation. 

 

Damage and/or defects resulting from inappropriate use also do not fall under the 
warranty provisions. 

 

We also disclaim all liability for any bodily injury resulting from inappropriate use of the 
tool. 

 

Repairs may only be carried out by an authorized customer service centre for Powerplus 
tools. 

 

You can always obtain more information at the number 00 32 3 292 92 90. 

 

Any transportation costs shall always be borne by the customer, unless agreed otherwise 
in writing. 

 

At the same time, no claim can be made on the warranty if the damage of the device is the 
result of negligent maintenance or overload. 

 

Definitely excluded from the warranty is damage resulting from fluid permeation, excessive 
dust penetration, intentional damage (on purpose or by gross carelessness), inappropriate 
usage (use for purposes for which the device is not suitable), incompetent usage (e.g. not 
following the instructions given in the manual), inexpert assembly, lightning strike, 
erroneus net voltage. This list is not exhaustive. 

 

Acceptance of claims under warranty can never lead to the prolongation of the warranty 
period nor commencement of a new warranty period in case of a device replacement. 

 

Devices or parts which are replaced under the warranty  therefore remain the property of 
Varo NV. 

 

 We reserve the right to reject a claim whenever the purchase cannot be verified or when it 
is clear that the product has not been properly maintained. (Clean ventilation slots, carbon 
brushes serviced regularly, etc.). 

 

Your purchase receipt must be kept as proof of date of purchase. 

Summary of Contents for Powerplus XQ POWXQG4070





















Reviews: