POWXG4038
EN
Copyright © 2019 VARO
P a g e
|
4
www.varo.com
4 SYMBOLS
In this manual and/or on the machine the following symbols are used:
Warning / Danger!
Keep bystanders away.
Read manual before usage.
Remove plug from the
mains immediately if the
cable is damaged or cut.
In accordance with essential
applicable safety standards
of European directives.
Switch off and unplug the
device before cleaning or
performing maintenance on
it.
Never operate or leave the
machine in the rain or in
damp or wet conditions.
Moisture is an electrical
shock hazard.
Mandatory use of eye
protection.
Class II - The machine is
double insulated; Earthing
wire is therefore not
necessary.
Rotating impeller blades
can cause sever injury.
5 GENERAL POWER TOOL SAFETY WARNINGS
Read all safety warnings and instructions. Failure to heed warnings and follow instructions
may result in electric shock, fire and/or serious injury. Keep safety warnings and instructions
for future reference. The term "power tool" in the safety warnings refers to your mains-
operated (corded) power tool or battery- operated (cordless) power tool.
5.1
Working area
▪
Keep working area clean and well lit. Untidy and dark areas can lead to accidents.
▪
Do not operate power tools in potentially explosive surroundings, for example, in the
presence of inflammable liquids, gases or dust. Power tools create sparks which may
ignite the dust or fumes.
▪
Keep children and bystanders at a distance when operating a power tool. Distractions can
cause you to lose control of it.
5.2
Electrical safety
▪
Always check that the power supply corresponds to the voltage on the rating plate.
▪
Power tool plugs must match the outlet. Never modify the plug in any way. Do not use
adapter plugs with earthed power tools. Unmodified plugs and matching outlets will
reduce the risk of an electric shock.
▪
Avoid body contact with earthed surfaces such as pipes, radiators, kitchen ranges and
refrigerators. There is an increased risk of an electric shock if your body is earthed.
