POWX13302
EN
Copyright © 2015 VARO
P a g i n a
|
6
www.varo.com
Keep your workplace clean. Blends of materials are particularly dangerous. Dust from light
alloys can burn or explode.
Avoid unintentional switching on. Ensure the On/Off switch is in the off position before
inserting battery pack. Carrying the power tool with your finger on the On/Off switch or
inserting the battery pack into power tools that have the switch on invites accidents.
Do not open the battery. Danger of short-circuiting. Protect the battery against heat, e.g.,
also against continuous sun irradiation and fire. There is danger of explosion.
In case of damage and improper use of the battery, vapours may be emitted. Provide for
fresh air and seek medical help in case of complaints. The vapours can irritate the
respiratory system.
When the battery is defective, liquid can escape and come into contact with adjacent
components. Check any parts concerned. Clean such parts or replace them, if required.
Use the battery only in conjunction with your power tool. This measure alone protects the
battery against dangerous overload.
Wear protective gloves when changing application tools/accessories.
Application tools/ accessories become hot after prolonged usage.
Do not scrape wetted materials (e. g. wallpaper) or on moist surfaces. Penetration of water
into the machine increases the risk of an electric shock.
Do not treat the surface to be worked with solvent-containing fluids. Materials being
warmed up by the scraping can cause toxic vapours to develop.
Exercise extreme caution when handling the scraper. The accessory is very sharp; danger
of injury.
7 ASSEMBLY
7.1
Battery charging
Use only the battery charger supplied with your tool. Only these battery chargers are matched
to the lithium ion battery of your power tool.
Note: The battery is supplied partially charged. To ensure full capacity of
the battery, completely charge the battery in the battery charger before
using your power tool for the first time. The lithium ion battery can be
charged at any time without reducing its service life. Interrupting the
charging procedure does not damage the battery.
7.2
Charging indication
The charger has two LED lights (red and
green). The green one is the power indicator.
When the charger is plugged in, this will light
up.
