background image

 

POWE10081 

EN

 

Copyright © 2018 VARO NV 

P a g e

 | 

6

 

www.varo.com 

8  OPERATION 

8.1 

Switching ON/OFF 

 

Connect the plug to the power supply. The power-on indicator (11) is illumed until the tool 
disconnect from the power mains. 

 

Switching on: 

 Press the operating switch (7). 

 

Switching off: 

 Release the operating switch (7) 

8.2 

Handle attachment (Fig. 3) 

For reasons of safety, only use the hammer drill with handle attachment. 
You will be able to obtain a safe body position when working by rotating the handle attachment. 
Loosen and turn the handle attachment in an ant-clockwise direction. Slip loop onto the neck 
of the housing tool and position the handle, then tighten the handle attachment. 

8.3 

Depth stop 

Loosen the handle attachment and place the straight part of the depth stop in the hole. Adjust 
the depth stop and retighten the handle attachment. 

8.4 

Dust collection device (Fig. 4) 

Before  carrying  out  hammer-drilling  work  vertically  overhead  pull  dust  collecting  device  over 
the drill bit. 

8.5 

Hammer / drill switch 

 

The hammer/drill switch can switch the drill, hammer and hammer/ drill functions.  

 

To set the function, please use below compounding of front and rear hammer/drill switch. 

 

Hammer/ drill mode: 

Drill in masonry, concrete and natural stone.  
Don’t use the hammer drill function for ceramic 
tile or others material can not withstand impact 
energy. 

 

Hammer mode:  

Drill in masonry, concrete and natural stone.  

 

Drilling mode:  

Drilling in wood, synthetic materials and metal. 

 

Chisel Rotation: 

Non-working position used only to rotate flat 
chisel into the desired position

 

 

WARNING!  No  function  mode: 
The  motor  turns  without  load, 
the  shaft  will  not  turn.    Do  not 
set  the  switch  like  this.  It  may 
damage the motor greatly. 

Summary of Contents for PowerPlus POWE10081










Reviews: