POWE00042
EN
Copyright © 2017 VARO
P a g e
|
7
www.varo.com
8
OPERATION
8.1
Charging the battery (fig. 1)
The battery (5) must be charged before first use. Only after several charge and discharge
cycles the battery will attain full capacity.
The battery pack will become slightly warm to the touch while charging, this
is normal and does not indicate a problem.
Do not place the charger in an area of extreme heat or cold, it will best at
normal room temperature.
NOTE: Allow the battery pack to cool completely before charging. Inspect
the battery pack before charging; do not charge a cracked or leaking
battery pack.
Plug the adapter (c) into suitable outlet.
Plug the charger plug (b) into the charging socket (e) of battery pack (5) and ensure to
connect firmly. The red LED light (a) will illume to show the battery is charging.
When the battery is loaded, the red LED light (a) will extinguish and green LED light (d)
light on the battery pack until the charger disconnect from the mains.
NOTE: If the battery does not fit properly, disconnect it and confirm that the
battery pack is the correct model for this charger as shown on the
specification chart. Do not charge any other battery pack or any battery
pack that does not securely fit the charger.
Frequently monitor the charger (9) and battery pack (5) while connected.
Unplug the charger and disconnect it from the battery pack when finished.
Allow the battery pack to cool completely before using it.
Store the charger and battery pack indoors, out of reach of children.
NOTE: If battery is hot after continuous use in the tool, allow it to cool down
to room temperature before charging. This will extend the life of your
batteries.
8.2
Battery capacity indicator
There is LED Battery Indicator (10) above on the ON/OFF switch trigger (1)such as the Fig. 2
shows. You can check the capacity status of the battery with squeezing the switch trigger (1).
Before use the machine, please press switch trigger to check if the battery is full enough for
properly working.
The statuses of two LED lights show the capacity level of the battery:
Green LED light: The battery is fully charged.
Red LED light: Battery almost discharged.
NOTE: The LED battery indicators always light during operation.
NOTE: Please charge the battery after using each time, it is necessary to
charge the battery per month if the machine is out of work.