POWDP2040
EN
Copyright © 2018 VARO
P a g e
|
10
www.varo.com
CAUTION: To prevent damage, allow the Anvil to come to a complete stop
before changing the direction of rotation.
▪
Position the socket over the fastener.
▪
Holding the handle firmly with one hand and the top of the housing with your other hand,
gently squeeze the ON/OFF switch trigger.
▪
To prevent accidents, turn off the tool and remove its battery pack after use. Clean, then
store the tool indoors out of children’s reach.
Note: The amount of actual torque may vary depending on the cleanness
and condition of the threads and other factors. If tightening critical
components, chase threads before assembling components and check the
actual torque applied to the fastener with a mechanical torque wrench (not
supplied).
11 CLEANING AND MAINTENANCE
11.1
Cleaning
▪
Keep the ventilation slots of the machine clean to prevent overheating of the engine.
▪
Regularly clean the machine housing with a soft cloth, preferably after each use.
▪
Keep the ventilation slots free from dust and dirt.
▪
If the dirt does not come off use a soft cloth moistened with soapy water.
Never use solvents such as petrol, alcohol, ammonia water, etc. These
solvents may damage the plastic parts.
11.2
Maintenance
▪
Our machines have been designed to operate over a long period of time with a minimum
of maintenance. Continuous satisfactory operation depends upon proper machine care
and regular cleaning.
12 TECHNICAL DETAILS
Model nr.
POWDP2040
Rated voltage (direct current)
40 V
Rotation speed
0-2000 min-1
Socket type
½”
Max. torque
350 Nm
13 NOISE
Noise emission values measured according to relevant standard. (K=3)
Acoustic pressure level LpA
87 dB(A)
Acoustic power level LwA
98 dB(A)
ATTENTION! Wear hearing protection when sound pressure is over 85
dB(A).
aw (Vibration)
6,7 m/s²
K = 1.5 m/s²
