POW30644
EN
Copyright © 2013 VARO
P a g e
|
5
www.varo.com
If there are devices for connecting dust extraction and collection facilities, please ensure
that they are attached and used correctly. Using such devices can reduce dust-related
hazards.
5.4
Power tool use and care
Do not expect the power tool to do more than it can. Use the correct power tool for what
you want to do. A power tool will achieve better results and be safer if used in the context
for which it was designed.
Do not use the power tool if the switch cannot turn it on and off. A power tool with a broken
switch is dangerous and must be repaired.
Disconnect the plug from the power source before making adjustments, changing
accessories, or storing power tools. Such preventive safety measures reduce the risk of
starting the power tool accidentally.
Store power tools, when not in use, out of the reach of children and do not allow people
who are not familiar with the power tool or these instructions to operate it. Power tools are
potentially dangerous in the hands of untrained users.
Maintenance. Check for misalignment or jammed moving parts, breakages or any other
feature that might affect the operation of the power tool. If it is damaged, the power tool
must be repaired. Many accidents are caused by using poorly maintained power tools.
Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting
edges are less likely to jam and are easier to control.
Use the power tool, accessories and cutting tools, etc., in accordance with these
instructions and in the manner intended for the particular type of power tool, taking into
account the working conditions and the work which needs to be done. Using a power tool
in ways for which it was not intended can lead to potentially hazardous situations.
5.5
Service
Your power tool should be serviced by a qualified specialist using only standard spare
parts. This will ensure that it meets the required safety standards.
6 SPECIFIC SAFETY WARNINGS FOR CORDLESS DRILL/DRIVERS
Important! Use of any accessories or attachments other than those supplied or
recommended in these operating instructions can mean the risk of injury.
When using the cordless drill/driver ear protectors and a face mask should be worn,
particularly when hammer drilling in concrete. Exposure to noise can cause damage to
hearing.
Always use the guide handle supplied. Lack of control over the power tool can lead to
injuries.
Do not use the drill/driver on asbestos or materials containing asbestos.
Do not leave power tools running unattended. Always switch off and do not put down or
leave until it has stopped completely.
Long hair must be covered. Do not work in loose fitting clothing.
Be careful when working on walls. Damage to power supply lines, gas or water pipes can
lead to dangerous situations. Use appropriate detectors to establish whether there are
concealed wires or pipes in the working area.
Secure the work piece. The work piece is only secure if it is held by work-holding devices
or in a vice.
7 SAFETY INSTRUCTIONS FOR CHARGER UNIT AND BATTERIES:
The battery pack should be removed before maintenance or lengthy periods of non-use.
The battery should be charged every six months during lengthy periods of non-use.
Only use the recommended battery pack.
Please read the regulations and safety instructions before charging the battery.
