POW30625
EN
Copyright © 2015 VARO
P a g e
|
6
www.varo.com
If the dirt does not come off use a soft cloth moistened with soapy water.
Never use solvents such as petrol, alcohol, ammonia water, etc. These
solvents may damage the plastic parts.
10 TECHNICAL DATA
POW30625
Voltage / frequency charging unit
230 V / 50 Hz
Rated Voltage
18V
Rotation speed
0-550 min
-1
Torque positions
20+1
Max. drill capacity
10 mm
Charger time
3/5 hours
Battery capacity
800 mAh
Battery type
Ni-CD
Max. torque
12 Nm
Chuck type
Keyless chuck
11 NOISE
Noise emission values measured according to relevant standard. (K=3)
Acoustic pressure level LpA
71 dB(A)
Acoustic power level LwA
82 dB(A)
ATTENTION! Wear hearing protection when sound pressure is over 85
dB(A).
aw (Vibration)
Max 3,2 m/s²
K = 1,5 m/s²
12 SERVICE DEPARTMENT
Damaged switches must be replaced by our after-sales service department.
If the connecting cable (or mains plug) is damaged, it must be replaced by a special
connecting cable which is available from our service department. Replacement of the
connecting cable should only be carried out by our service department (see last page) or
by a qualified specialist (qualified electrician).
13 STORAGE
Thoroughly clean the whole machine and its accessories.
Store it out of the reach of children, in a stable and secure position, in a cool and dry
place, avoid too high and too low temperatures.
Protect it from exposure to direct sunlight. Keep it in the dark, if possible.
Don’t keep it in plastic bags to avoid humidity build-up.
