POWXG2041
EN
Copyright © 2015 VARO
P a g e
|
7
www.varo.com
Never use the hedge trimmer without check the tightness of the bracket
.
9 CLEANING AND MAINTENANCE
Warning! Before performing any work on the equipment, pull the power
plug.
Check your machine regularly before starting the work.
Damaged cutting blades have to be repaired or exchanged by a qualified service man
before working with the machine
After each cutting operation, clean the cutting blade with a soft brush and cloth with
lubricating fluid oil and spray a thin layer of fluid protective oil on the completes blade.
Always keep the ventilation slots in motor housing clean
Never clean or spray a machine with water .clean the motor housing only with a moist
cloth and never apply detergents or solvents! These could ruin the plastic parts of the
machine ,Finally, dry the motor housing carefully.
Store the machine with the supplied protection cover(15)
Only use original accessories and spare parts.
10 TECHNICAL DATA
Type
POWXG2041
Voltage ~Frequency
230-240 V ~50 Hz
Power input
710 W
Blade length
560 mm
Cutting length
510 mm
Cutting capacity
27 mm
No load speed
1800 /min
Telescopic length
1.5 m to 2.8 m
Weight
5 kg
11 NOISE
Noise emission values measured according to relevant standard. (K=3)
Acoustic pressure level LpA
84dB (A)
Acoustic power level LwA
102dB (A)
ATTENTION!
Wear
hearing
protection
when
sound
pressure
is
over 85 dB(A).
aw (Vibration)
5.2 m/s
2
K = 1.5 m/s²
