POWXG2030LI
EN
Copyright © 2013 VARO
P a g e
| 6
www.varo.com
8.3
Blade brake
To avoid injuries from moving blade, the blades on your hedge trimmer will stop moving within
0.5 seconds after you release either the safety catch or the deadmans switch.
8.4
Safety cutting bar
The recessed blades reduce the risk of injury from inadvertently touching the blades.
8.5
Cutting hedges
Before you start your work, select branches with a diameter not bigger than +/-11mm and cut
them with a pruning shear. A trapezoidal cut corresponds to the natural, growth of plants and
results in optimal hedge growing.
First cut the sides from the bottom to the top. Cut the upper part giving it the shape you
prefer, in a straight horizontal form, roof-like or rounded.
The safety blade has laterally rounded and staggered cutting teeth to reduce danger of
injury. The additional shock protection avoids inconvenient kickback when the blades
come into contact with walls, fences etc.
If the blades are jammed or blocked by obstacles, switch the motor off immediately,
remove the battery, and then remove the object jamming the blades.
Caution! Metal obstacles like fences etc. may damaged the cutting blades.
9 CLEANING AND MAINTENANCE
Warning! Before performing any work on the equipment, always remove the
battery.
Check your machine regularly before starting the work.
Damaged cutting blades have to be repaired or exchanged by a qualified service man
before working with the machine
After each cutting operation, clean the cutting blade with a soft brush and cloth with
lubricating fluid oil and spray a thin layer of fluid protective oil on the completes blade.
Always keep the ventilation slots in motor housing clean
Never clean or spray a machine with water .clean the motor housing only with a moist
cloth and never apply detergents or solvents! These could ruin the plastic parts of the
machine ,Finally, dry the motor housing carefully.
Always have your hedge trimmer’s blades sharpened or replaced at a qualified workshop
10 STORAGE
Remove the battery pack and keep your hedge trimmer in a safe, dry place out of children’s
reach.
Store the machine with the supplied protection cover (10).
Only use original accessories and spare parts.
11 TECHNICAL DATA
Type
POWXG2030LI
Battery voltage / capacity
18 VDC / 1500mAh
Battery type
Li-ion
Cutting capacity
14 mm
Blade length
580 mm
No load speed
1100min
-1
Charger :
Input Voltage ~Frequency
210-240VAC, 50-60 Hz.
