POW63703
EN
Copyright © 2014 VARO
P a g e
|
11
www.varo.com
15 TROUBLE SHOOTING
PROBLEM
CAUSE
ACTION
Machine fails to
operate
Power turned off
Mains socket faulty
Extension cable damaged
Fuse faulty/blown
Mower in long grass
Motor protector has activated
Turn power on
Use another socket
Inspect cable, replace if
damaged
Replace fuse
Increase height of cut and
tilt mower
Allow to cool and increase
height of cut
Machine functions
intermittently
Extension cable damaged
Machine’s internal wiring
damaged
Motor protector has activated
Inspect cable, replace if
damaged
Allow to cool and increase
height of cut
Machine leaves
ragged finish
Or motor labours
Height of cut too low
Cutting blade blunt
Underside of machine badly
clogged
Blade fitted upside down
Increase height of cut (see
“Height of Cut Adjustment”)
Replace
blade (see “Blade
Maintenance”)
Clean machine (see “After
Mowing/Storage”)
Refit blade correctly (see
“Blade Maintenance”)
Cutting blade not
rotating while
machine switched
on
Cutting blade obstructed
Blade nut/bolt loose
Clear obstruction
Tighten blade nut/bolt
Excessive
vibration/noise
Blade nut/bolt loose
Cutting blade damaged
Tighten blade nut/bolt
Replace blade
16 WARRANTY
This product is warranted as provided by law for a 24 -month period effective from the
date of purchase by the first user.
This warranty covers all material or production flaws excluding : batteries, chargers,
defective parts subject to normal wear & tear such as bearings, brushes, cables, and
plugs, or accessories such as drills, drill bits, saw blades, etc. ; damage or defects
resulting from maltreatment, accidents or alterations; nor the cost of transportation.
Damage and/or defects resulting from inappropriate use also do not fall under the
warranty provisions.
We also disclaim all liability for any bodily injury resulting from inappropriate use of the
tool.
Repairs may only be carried out by an authorised customer service centre for Powerplus
tools.
You can always obtain more information at the number 00 32 3 292 92 90.
Any transportation costs shall always be borne by the customer, unless agreed otherwise
in writing.
At the same time, no claim can be made on the warranty if the damage of the device is the
result of negligent maintenance or overload.
Definitely excluded from the warranty is damage resulting from fluid permeation, excessive
dust penetration, intentional damage (on purpose or by gross carelessness), inappropriate
usage (use for purposes for which the device is not suitable), incompetent usage (e.g. not
following the instructions given in the manual), inexpert assembly, lightning strike,
erroneus net voltage. This list is not exhaustive.
