background image

 

POWX0041LI 

EN

 

Copyright © 2018 VARO 

P a g e

 | 

7

 

www.varo.com 

7.3 

Torque adjustment ring (2) 

The drill has a torque adjustment ring. It allows you to select the desired torque depending on 
the task you have to perform (drill / different types of screws into different materials). The proper 
setting depends on the type of material and the size of screw you are using.  
TO ADJUST  TORQUE:  Identify the  17+1 torque  indicator  settings  located  on the front  of  the 
drill. Rotate adjusting ring (2) to the desired setting. The lower the number, the lower the torque 
setting. The higher the number, the higher the torque setting. 

7.4 

On/off switch (5) 

To turn your drill ON, depress the switch trigger. To turn it OFF, release the switch trigger. 
The switch trigger can be locked in the OFF position. This feature helps reduce the possibility 
of accidental starting when not in use.  

7.5 

Forward/reverse selector (right/left rotation selector) (4) 

The drill has a forward/reverse selector located above the switch trigger. 

 

F(Forward) (Forward): Press selector on right side of machine (to the left  side): drill turns 
right (forward, fasten screws) 

 

R(Reverse) (Reverse): Press selector on left side of machine (to the right  side): drill turns 
left (reverse/ loosen screws) 

CAUTION:  To  prevent  damage  to  the  gearbox,  always  allow  the  chuck  to 
come  to  a  complete  stop  before  changing  the  direction  of  rotation  or 
selecting another speed (HI-LO). To stop, release the trigger switch. 

7.6 

Speed selector (3) 

Your cordless drill has a two-speed gear, designed for drilling or driving at LO or HI speed. A 
slide switch is located on top of your drill to select either LO (1) or HI (2) speed. 
The low speed (LO) is used, in combination with the torque setting, for screwing screws in  or 
out and for drilling with a larger diameter. 
The high speed (HI) is used only for drilling (never for screwing, as this may lead to damage of 
the tool). 

7.7 

LED worklight (6) 

Your cordless drill is equipped with an LED light at the front (above the ON/OFF switch) above 
the  battery  pack.  The  white  LED  light  will  light  when  you  operate  the  machine,  providing  the 
work area to be lighted. 

7.8 

TPR soft grip 

 

Your cordless drill is equipped with TPR soft grip and protective parts.  TPR 
(Thermoplastic rubber) is elastic, chock absorbing and environmental friendly (recyclable). 

8  (PRE)OPERATION 

8.1 

Battery charging 

Use only the battery charger supplied with your tool. Only these battery chargers are matched 
to the lithium ion battery of your power tool. 

Note: The battery is supplied partially charged. To ensure full capacity of the 
battery,  completely  charge  the  battery  in  the  battery  charger  before  using 
your power tool for the first time. The lithium ion battery can be charged at 
any  time  without  reducing  its  service  life.  Interrupting  the  charging 
procedure does not damage the battery. 

Charging procedure 1h: 

Summary of Contents for Power Plus POWX0041LI













Reviews: