TIP
It is advisable to always indicate FRAGILE on the packaging
4.2. Inspection on delivery
Check upon receipt of the product:
• the integrity of the packaging
• the integrity of the content
• the presence of all components
In case of problems, notify the forwarder immediately.
WARNING
The manufacturer declines all responsibility for damage to the product due to transport
4.3. Handling
The product must be handled by hand or using suitable lifting equipment in relation to its weight and the
regulations in force.
If necessary, use dedicated handling equipment (cranes, ropes, trolleys), using the lifting points provi-
ded in the product.
During handling it is recommended to:
• Handle with care
• keep away from suspended loads
• always wear accident prevention equipment
• be careful not to damage electrical cables
Do not handle the product using electrical cables as lifting gear.
WARNING
Failure to follow the instructions may result in damage to the product, the system in which
it is installed and, in the worst cases, damage to property or persons with even fatal con-
sequences.
4.4. Storage
The product must be stored in its packaging in a dry place, without sudden changes in humidity and
temperature and protected from mechanical (weights, vibrations), thermal and chemical agents.
The temperature of the storage environment must be between -20°C (-4°F) and 70°C (+158°F) with a
maximum relative humidity of 85% (non-condensing).
If the product remains in stock for more than 24 months from the manufacturing date shown on the
packaging, it is necessary to check the mechanical integrity of its parts and supply power to it at least
once every 12 months.
PSDrive
12
