P/N VSS0190
VAR-SOM-AM62 based on TI Sitara
™ AM625x
Evaluation Kit Quick Start Guide
Setting the host PC for debug
1. Download any PC terminal software (e.g.
).
2. Set the PC terminal software parameters as
follows:
- Baud Rate: 115200
- Data bits: 8
- Stop bits: 1
- Parity: None
- Flow Control: None
Booting from eMMC
1. Set Boot select switch (SW3)
to “Internal”
position
to boot from the VAR-SOM-AM62
internal storage.
2. Plug the wall adapter into the 12V power jack
(J24) and to a 120VAC~240VAC power source.
3. Set Power ON switch (SW7) to ON state.
4. Boot messages are printed within the PC
terminal window.
Booting from a micro SD card
The microSD card is supplied within the package.
Updated SD card images can also be downloaded
from the Variscite FTP server.
See more details in the recovery SD card section in
the Variscite Wiki pages.
1. Set Power ON switch (SW7) to off state.
2. Set Boot select switch (SW3) to
“SD” position in
order to boot from SD Card.
3. Push microSD card into the microSD card slot
(J28) of the Symphony-Board.
4. Set Power ON switch (SW7) to ON state.
5. Boot messages are print
ed within PC’s terminal
window.
(Re-)Installing the file system to
eMMC
Please refer to the recovery SD card section in
the Variscite Wiki pages.
Links
o
Wiki page:
https://variwiki.com/index.php?title=VAR-SOM-
AM62
o
VAR-SOM-AM62 Evaluation kits:
https://www.variscite.com/product/evaluation-
kits/var-som-am62-evaluation-kits/
o
VAR-SOM-AM62 System on Module:
https://www.variscite.com/product/system-on-
module-som/cortex-a53-krait/var-som-am62-ti-
am625x/
o
Symphony
carrier board:
https://www.variscite.com/product/single-board-
computers/symphony-board/
o
Customer portal:
https://varisciteportal.axosoft.com/login
Thank you for purchasing Variscite’s
product.
For additional assistance please
contact:
