VAR-SOM-AM62 based on TI Sitara
™ AM625x
Evaluation Kit Quick Start Guide
9
11
12
13
15
19
18
22
28
29
26
16
17
20
23
21
10
14
24
25
27
1
2
3
4
5
6
7
8
Features:
1. Power ON Switch (SW7)
2. 12V DC In Jack (J24)
3. USB Debug (J29)
4. micro SD Card slot (J28)
5. USB 2.0 DRD (J26)
6. USB 2.0 Host (J23)
7. Gigabit Ethernet #0 (J21)
8. Gigabit Ethernet #1 (J20)
9. MIPI-CSI #1 Camera connector [optional] (J19)
10. Miscellaneous Header #1 (J17)
11. HDMI/ MIPI-CSI #2 Camera connector
[not in use] (J13)
12. Mini PCI Express Connector [not in use] (J15)
13. Miscellaneous Header #2 (J3)
14. SOM Connector (J1)
15. LVDS#B Header (J5)
16. LVDS#A Header (J7)
17. Fan Power Connector (J9)
18. Digital Microphone (U1)
19. Resistive Touch (J10)
20. Capacitive Touch (J11)
21. User Buttons (SW1, SW2, SW4)
22. Line-In Connector (J12)
23. Headphones Connector (J14)
24. Boot Select Switch (SW3)
25. McASP/I2C/SPI/CAN Header (J16)
26. Reset Button (SW5)
27. PWR Select Switch (SW6)
28. UART/PWM Header (J18)
29. RTC Battery Holder (JBT1)
Evaluation kit initial Setup
1.
Carefully remove the 7” LCD and
Symphony-Board from the package.
2.
Connect the 7” LCD Display and Touch cables
to the Evaluation Kit connectors J7, J11
respectively.
Note:connect the display cable with the red
wire on pin 1. Connect the touch cable with the
metal contacts facing down.
3. Plug the USB type A to micro B cable between
the USB debug connector (J29) and a PC USB
port.
