VariQuest
®
Motiva™ 400 User’s Guide
2-1
2
Hardware and Software Setup
Installing Label Stock
The
Motiva™
400 carries a large variety of paper label stock that has been converted and
ready for use with your printer.
Install Label Stock:
1. Open the Top Cover.
2. Pull the spring-loaded label stock guide out far enough to fit the label stock.
3. Remove any shipping tape from the label stock roll to ensure it can unroll freely,
making certain that no adhesive is exposed.
CAUTION!
CAUTION!
Any exposed adhesive surface can attach itself to the inner workings of the print
mechanism and cause a media jam. Take care to ensure no adhesive is exposed.
Note:
If you are using fan-fold label stock or label stock other than standard square /
rectangular die-cut labels, see “Adjusting Label Stock Gap Sensor Position” on page 2-3
and
“Fan-Fold Label Stock” on page 2-6
for additional instructions.
Label Stock Guide
Stock Guide
Rollers
