Connectors at front- and backside:
At the back of the camera is the 15 pole
Sub-D plug for the camera cable, the
BNC socket for the AHD video cable.
In the front of the camera a protective glass is
inserted which is easy to change after turn of
the small screw.
On the bottom and upper side of the camera are 4 x M3 thread for mounting an adaptor with a
M8 grub screw and 1/4 " tripod thread. This assembly adaptor can be mounted, when
required, on lower or upper side of the camera.
ATTENTION:
The used screws must not longer then 2 mm fit into housing.
Screw for fixing protection
glass
connector camera cable
Switch for PAL or
AHD output
Connector for cooling
Tube 6mm o.d.
Variovision, Pöttinger Straße 23, DE-82041 Oberhaching, www.variovision.tv, [email protected]
5/14
WVS-16
When using the AHD-output, either a monitor with an AHD-input or our converter, item no. 401609
should be used.
