C A R E A N D M A I N T E N A N C E
16
5
6
5. Set the filter to dry in a well-aired place
and remove the dust bag.
6. After the filter has been dried completely,
re-install it. Push the filter onto the filter holder
and tighten the wing nut hand tight.
7
7. Re-attach the dirt container and make sure
that the container is pulled tight under the
housing (see page 13). The central vacuum
cleaner is closed and can now be turned
back on.
8. Plug the appliance back in.
If you have the VIP model, you’ll have to
re-plug in the appliance. Then press down
the reset button for 2 seconds.
The appliance is ready for use.
Pull out the cover into an upwards direction
by help of two fingers.
Insert the new filter and pull the cover all the
way down.
Exchanging the carbon dust filter
