VarioCooking Center WHITEFICIENCY Series, Original Technical Instructions, Page: 109 / 208

Heating system: general
Installation and description
Fig. 2, Heater
A Mica insulation plate
B "Thick Film" heater
C Electrical contact
D Thermocouple location
E Mounting stud passage
Features:
P = 1400W or 2286W (depend on model)
Available in 3 voltages:
200VAC - 230VAC - 445VAC
Important points!
● When installing, always use the truing bushes delivered in the replacement kit.
● There must be a torque of 4 Nm. Fig. 3.
● Read the installation instructions supplied with the kit carefully.
● The heating element must be in contact with the bottom of the pan
via the graphite sheet.
● The thermocouple must be properly centred and in contact with the bottom of the pan.
● After an exchange of the heating element it is customary to recalibrate the unit, or even to also
make an allocation. (See Chapter
Heating system > Allocation/calibration
).
IX.03
v03 • July-2016 • Hen
Heating system module
Line Units Serial number (starting from) Sw Revision
VCCM
VCCWE
All ExxXH1009xxxxxxx
A
B
C
E
D
4 Nm
2
3