Operation and usage
Operating instructions
Page 48 of 62
VarioShaker 270 with control box
It
e
m
n
u
mbe
r:
V
A
-A
rt
-00018
|
V
e
rs
io
n
:
0
5
/2
0
1
9
_
e
n
6.6.2
Data backup and restoration (backup and load)
Figure 6.14:
Start page settings (yellow) - Data backup and restoration (backup and load)
Using the “Download all Files” button, a file is downloaded with all MY CLIPS and
MY SEQUENCES.
You can select a file to upload to the control box through “Choose file” and upload
with “Load file”.
6.6.3
Input and output check (digital IO check)
Test the inputs and outputs.
6.6.4
Update and Version (Update and Version)
If you are the owner of a VarioShaker with the respective control box, you will
receive an e-mail with a software update where you are informed of the update and
its content. There are two files in the attachment that should be treated as follows.
6.6.4.1
Step-by-step instructions
1)
Create it on an empty mobile data carrier (USB drive).
Make sure that the data carrier is formatted in FAT32 and contains an
“updates” folder.
2)
Copy the two files that you received by e-mail and paste them into the
“updates” folder.
3)
The update files should look as follows:
✓
YYYY-MM-DD_XXXX.ruetteltisch.tar.xz (CONTROLLER)
✓
YYYY-MM-DD_XXXX.webtisch.tar.xz (GUI)
Summary of Contents for VA-Art-00018
Page 2: ......
