IC-68
ND
INSTALLATION GUIDE
1
WARNINGS AND PRECAUTIONS
Although the manufacturer has made every effort to ensure the accuracy of the
information contained herein, this document is subject to change without notice due to
ongoing product development.
WARNINGS AND PRECAUTIONS
Defective equipment, probe failure, blown fuses and/or tripped breakers may prove
harmful to the contents of the building. Therefore it is strongly recommended to install
backup devices and alarm or warning devices. Spare equipment should also be
available at the user’s site. Equipment manufactured by the manufacturer is protected
against normal line surges. High surges caused by thunder storms or power supply
equipment may damage this equipment. For added security against line voltage surges
it is recommended that surge and noise suppression devices be installed at the
electrical distribution panel. Use of shielded cable for probes is recommended for
protection against lightning. These devices are available from most electrical supply
distributors.
RECOMMENDATIONS
The manufacturer recommends that all installation procedures described herein be
performed by a qualified electrician or installation technician. Furthermore the
manufacturer recommends to test all the functions and equipment connected to the IC,
including the alarm system and backup devices, after installation, after changes to the
installation and every month after that.
Fuse verification and replacement, as well as the proper setting of control values shall
be the responsibility of the owner of this equipment.
www.monitrol.com
