When set to
MODEL
your guitar tuning is determined by the current
guitar model and
Selector Switch
position. To see this in action,
enter Variax mode and select the
CUSTOM 2
model, which is the
only bank preloaded with alternate tunings from the factory. Now
toggle your selector switch to preview the tunings preloaded with
each model. You can assign alternate tunings to any guitar in the
Guitar Model Selector
banks using our
Variax Workbench
software.
To bypass the Alternate Tuning feature, simply set the
Alternate
Tuning Knob
to
STANDARD
. In Standard mode, every Variax model
will play in standard tuning, including any alt-tuned models like the
ones in the Custom 2 bank.
5. Pickup Selector Switch -
In analog mode the selector enables your
magnetic pickups as shown below (1=bridge / 5=neck).
JTV-69
JTV-89
JTV-59
In Variax mode this switch has unique properties for each model.
Check out
The Guitars of Variax
section for details.
6
7
6. Analog Output -
Plug in a standard 1/4 inch guitar cable here.
7. VDI Digital Output -
For connecting to Line 6 hardware supporting
Variax Digital Interface (VDI). Only connect a Line 6 Variax Digital cable
to this output.
8
8. Battery Compartment -
Installation as shown. Please fully charge
the included lithium ion battery in its charger prior to your first use. A
fully charged battery will give you a minimum of 12 hours of life. Press
the Battery Check button for a quick reference of remaining battery
life:
4 LED
s=9+ hours
3 LED
s=6+ hours
2 LED
s=3+ hours
1 LED
=less than 3 hours
1 LED
blinking=less than 1 hour, recharge battery
Note:
There are two ways to supply power to Variax without a
battery. When connected to VDI Digital Input equipped hardware,
such as a POD X3 Live, power is supplied via this connection. Or, use
the optional XPS-DI direct box/power supply and TRS cable. With
this box you can power your Variax and it also works as an A/B box
to send your signal out of a DI to go direct to a board or acoustic
amplifier with certain models.
