Star 800 MIB TTLIO Control Manual
-
22 -
03-914947-02:2
In the column
Selection Type
, select the type of action that will
be done one the relays. Three choices are available: Channel,
Config ch.Value and Method ch. Value.
If Channel is selected the user can define the state of a specific
relay.
If Config ch. Value is selected the user can use at the specified
time a channel value configured in the system configuration.
If Method ch. Value is selected the user can use at the specified
time a channel value configured in the method.
In the column
Cfg. Name
select the name of the method
channel value or configuration channel value to use.
In the column
Channel Name
, select the name of the channel to
use.
In the column
Output Name
, select the name of the relay to use.
In the column
Action
, select the type of action to do on the
relay. Four actions are available: Open, Close, Invert and Pulse.
The open or close actions will open or close the relay. The
invert action will invert the state of the relay and the pulse will
pulse the relay for a defined time.
In the column
Pulse
, enter the length of the pulse in minutes.