ProStar 325 UV-Vis Detector Control Manual
-
23 -
03-914947-44:2
Sequence
1. To create a sequence, select
FILE / NEW SEQUENCE
menu, and complete the displayed creation wizard screen
(refer to the Galaxie Chromatography Data System User’s
Guide), by entering the system name that will perform the
analysis, the number of lines (corresponding to the number
of samples), and the sequence name.
2. The sequence is displayed. Complete the sequence
information columns (refer to the Galaxie Chromatography
Data System User’s Guide).
The
Method Name
, the
Run Name
, the
Run ID,
and the
Acquisition length
must be filled in before starting the
analysis. All these parameters are automatically imported
from the acquisition part if defined in the method.
3. Start the sequence by clicking on the
button.
NOTE:
For more details about how to start an acquisition, refer to the Galaxie
Chromatography Data System User’s Guide.
