Varian 949-9350, Nstruction Manual

Page: 24 / 79

TECHNICAL INFORMATION
Single-Phase Universal Motors Voltage Setting
CAUTION
Before connecting to the mains, check that your
electrical mains voltage corresponds to the motor
voltage setting.
,
WARNING!
Disconnect the motor from the mains before open-
ing the electrical box.
The motors are factory set to operate at 200-240 V
(50/60 Hz) nominal voltages.
To modify the voltage setting, change the position
of the voltage selector situated inside the motor
electrical box.
To confirm the change of the voltage setting from
High Voltage to Low Voltage, glow the orange la-
bel above the yellow label positioned on the elec-
trical box cover.
,
WARNING!
Close the motor electrical box cover before con-
necting to the main.
Voltage Selector
Orange label (100 to 120 V)
IEC 320 main socket
On/off switch
Motor Electrical box
19 87-900-943-01(E)