- 9 -
Fixture Size Drawing(mm)
Installation
Use an appropriate clamp to ring the fixture on the truss.
Follow the instructions mentioned at the bottom of the base.
Make sure that the device is fixed properly! Ensure that the structure (truss) to which you are attaching the fixtures is
secure.
Securing the fixture via one safety wire Securing the fixture via two safety wires
Cleaning!
Due to fog residue, smoke, and dust cleaning the internal and external optical lenses must be carried out periodically to
optimize light output.
Use normal glass cleaner and a soft cloth to wipe off the outside casing.
Clean the external optics with glass cleaner and a soft cloth every 20 days.
Always be sure to dry all parts completely before plugging the unit back in.
Cleaning frequency depends on the environment in which the unit operates (i.e. smoke, fog residue, dust, dew).
Unit not responding to DMX:
Check that the DMX cables are connected properly and are wired correctly (pin 3 is “hot”; on some other DMX devices
pin 5 may be “hot”). Also, check that all cables are connected to the right connectors; it does matter which way the inputs
and outputs are connected.