TRIMMER-50
TRIMMER-60
18
5.7.2.2
Working with the saw blade
The saw blade is meant for undercutting the self-seeded trees and shrubs up to a
(ZNA
Č
KA!) of max. 5 cm.
•
Set-up maximum speed and switch on the working tool drive see chapter
Starting
the mowing tool
.
•
Drive the saw blade slowly into the stem and cut the tree off while pushing on the
machine and balancing the saw blade side reaction. (Fig. 13)
! Protect your eyes and face by using approved working aids! It is necessary to
use ear protectors to CSN EN 352-1. To protect eyes and face use the means of
personal protection to CSN EN 1731.
Figure 13
! Be careful at cutting out the trees and shrubs since they can fall onto the ma-
chine operator.
! If the blade gets “seized“, release your hold on the clutch control horizontal bar
without a delay and pull the machine out from the engagement. Switch the engine
off and check fastening of the blade and its intactness.
It is not advised to use the saw blade and the guide wheel at the same time.
5.7.2.3
Working with the mowing disk
The style of work is different from the cutting with the string head. Drive the
machine into the grass stand, stop it and mow the stand by swinging the machine from
side to side at about 60° (as if cutting with a scythe).