Vari RBS-700D, Operating Instructions Manual

Page: 17 / 56

RBS-700D
2 EN Operating Instructions
Contents
2 EN Operating Instructions.....................................................................17
2.1 Introduction..................................................................................17
2.1.1 General Notice.....................................................................17
2.2 Operational Safety.........................................................................18
2.2.1 Safety Regulations...............................................................18
2.2.2 Noise and Vibrations Levels..................................................19
2.2.3 Safety Pictograms ...............................................................19
2.3 Basic Information..........................................................................19
2.3.1 Use of the Machine..............................................................19
2.3.1.1 Technical Data...........................................................20
2.3.2 Description of the Machine and its Components.....................20
2.4 Operating Instructions...................................................................20
2.4.1 Assembling and Putting the Machine into Operation...............20
2.4.1.1 Unpacking.................................................................20
2.4.1.2 Machine Assembly Procedure......................................20
2.4.2 Attaching and removing the adaptor.....................................21
2.4.2.1 Attaching the adaptor.................................................21
2.4.2.2 Mounting and tensioning the belt................................22
2.4.2.3 Removing adaptor......................................................22
2.4.3 Working with the machine....................................................23
2.4.3.1 Travel Speed Selection................................................23
2.4.3.2 Adaptor Drive Clutch Engagement...............................23
2.4.3.3 Attachment Drive Clutch Disengagement.....................23
2.4.3.4 Growth Cutting Method..............................................23
2.4.3.5 The Machine Working Width.......................................24
2.4.3.6 Mowing Troubles........................................................24
2.5 Maintenance, Care, Storage...........................................................24
2.5.1 Recommended Tools and Accessories....................................24
2.5.2 Sharpening, replacement of working tool..............................25
2.5.3 Machine Lubrication.............................................................25
2.5.3.1 Lubrication Points.......................................................25
2.5.4 Adjusting tension pulley.......................................................25
2.5.5 V-Belt Change.....................................................................26
2.5.6 Servicing intervals................................................................26
2.5.6.1 Troubleshooting.........................................................27
2.5.6.2 Storage.....................................................................27
2.5.6.2.1 Machine Washing and Cleaning.........................27
2.5.6.3 Disposal of Packaging and the Machine at the End of its
Service Life............................................................................27
2.5.6.4 How to Order Spare Parts...........................................27
2.6 Manufacturer’s Contact Information................................................28
2.7 Attached illustrations.....................................................................28
The manufacturer reserves the right to implement technical changes and innovations not affecting the machine's operability and safety. These changes may not show in these Operating
Instructions. The images are for demonstration purposes only and may not represent the real condition and equipment of the machine. Typographical errors reserved.
2.1 Introduction
Dear Customer/User!
Thank you for your confidence in purchasing our product. You have become an owner of a device from the wide range of machinery and
tools of the gardening, farming, small agricultural and municipal technology system manufactured by VARI, a.s.
Brush cutting adaptor RBS-700D can be attached to the new generation of the multifunctional carrier RAPTOR Hydro . The adaptor
uses proven design elements with dedicated brush cutters and multifunctional lawn tractors VARI, a.s.. The utilization of a drum with five
blades and engagement of 70cm significantly increases the cutting performance while reducing the energy consumption. The new feature of
this machine is the utilization of a redesigned sturdier bearing of the rotating bottom disc and the holes in the off-take shroud of the cutting
drum for better off.take of the cut vegetation and easier cleaning inside of the drum.
A brand new class of the hydro carrier for demanding users and smaller municipalities - that is RAPTOR Hydro made by VARI. Modern
press-moulded parts that combine elegance, solidity and durability that are complemented by many traditional features expected by
customers of
VARI.
RAPTOR Hydro is specifically designed to allow for as convenient handling as possible; ergonomics and good balancing of the machine
were the top priority when developing the equipment.
The powerful Briggs&Stratton 950E engine of the 8 HP performance class, the TUFF TORQ K 46ED hydrostatic gearbox with an
automatic differential lock, the NORAM VARI centrifugal clutch and brake, an integrated additional fuel tank with the capacity of 4.5 litres
(the total capacity of the both tanks is 5.6 litres of fuel ), minimal forces on control handles, maximum adjustment of the handlebars and
convenient and fast attachment of various accessories that is to gradually appear on the market are elaborated elements and robust
components that accomplish the successful new generation of the machines. RAPTOR Hydro was awarded the GRAND PRIX gold
medal at the TECHAGRO 2016 exhibition.
Please read these operating instructions carefully. If you follow the instructions contained herein, our product will serve you reliably for
many years.
2.1.1 General Notice
You must read these operating instructions and follow all the machine operating instructions in order to prevent any health risks or
property damage to the user or other persons.
The safety instructions specified in these operating instructions do not cover all the possible conditions and situations, which may occur in
practice. Safety factors, such as a reasonable approach, care, and caution are not included in these operating instructions, but it is assumed
that every person using the machine or doing any maintenance work on it is able to sufficiently use them.
Only mentally and physically fit persons may operate this machine. Should this machine be used commercially, the owner of the machine
is bound to provide operators with work safety training and instruct them regarding its operation, and keep records of such training . The
owner must also implement so-called categorization of works per corresponding national legislation.
If any piece of information contained in the manual is unclear to you, please contact your seller 25 or directly the machine
manufacturer 26 . On our web page you can find this manual in electronic format among documents for this product and also in the archive
of user's manuals.
The operating instructions attached to this machine are its integral part. They must be available at all times, stored at an accessible place
where they cannot get destroyed. When selling the machine to another person, the operating instructions must be handed over to the new
owner. The manufacturer bears no responsibility for the risks, hazards, accidents, or injuries resulting from operation of the machine if the
above-mentioned conditions have not been met.
The manufacturer bears no responsibility for the damage caused by unauthorized use, inappropriate operation, and any damage caused
by any modification of the machine without the manufacturer’s approval and by using spare parts that are not genuine.
25
Fill in the dealer’s address in the table in the heading of this manual (unless already filled in by the dealer).
26
For the address of the manufacturer, see the end of these operating instructions.
17
re
vi
ze
0
2/
20
18