Lucina MaX
/
Dorotha
2.2.2 N
OISE
AND
V
IBRATIONS
L
EVELS
Description
BDR-620D
BDR-620DH
BDR-620DBiS
BDR-620DZ
acoustic pressure emission level
A
at the
operator's
L
pAd
site
82+1.5 [dB]
84+4 [dB]
84+4 [dB]-
Guaranteed
value of sound power
A
L
WA,G
98dB
98dB
98dB-
Declared
summary value of vibration acceleration
transferred to operator's hand/arm
a
hvd
(7.3+2.9 )m.s
-2
(6.7+2.7 )m.s
-2
(8,5 +3,4) m.s
-2
-
Table 13: Noise and Vibrations Levels
2.2.3 S
AFETY
P
ICTOGRAMS
The user is obliged to keep the pictograms on the machine in a readable state and, in case of any damage, ensure their replacement.
Position:
Number: Description:
Combined sticker (
Pict. 18
),
which is attached under the
rear plastic cover on the device
frame
1
Before using the machine, read through the operating instructions.
2
When servicing the machine, disconnect the wire from the ignition spark plug and remove
the battery
from its holder.
3
It is forbidden to place your hands or feet into the operating area of the cutting tool – risk
of getting cut.
4
Risk of being hit by flying debris, cuttings, ejected items, etc. Other persons and animals -
keep a safe distance from the machine.
5
During work observe the maximum permissible slope for operation.
6
Use eye and hearing protection.
A separate sticker on the front
cover. (
Pict. 19
-
Tool turning direction arrow – Right (Clockwise)
A separate sticker on the front
cover. (
Pict
-
Prohibited space for other persons and animals. Minimum safe distance from the machine is
50 m.
A separate sticker on the front
cover. (
Pict. 21
-
Machine's guaranteed sound power level. Value according to
Table 13
Sticker (
Pict. 17
) attached on
the control lever
1
on the right
handlebar.
-
Starting the working tool drive:
0
= working tool not moving
1
= safety engaged
2
= working tool moving
Sticker (
Pict. 16
) attached on
the control lever
2
on the right
handlebar.
-
Machine travel start
0
= the machine is stationary
1
= The machine is moving
Table 14: Safety Pictograms
2.3 B
ASIC
I
NFORMATION
2.3.1 U
SE
OF
THE
M
ACHINE
The BDR-620D brush cutters
Lucina MaX
and
Dorotha
are designed and manufactured according to the latest findings concerning
small garden and agricultural technologies. They are easy-to-use and feature a quiet, powerful, fuel-efficient engine and trouble-free
maintenance.
The brush cutter adaptor
is designed
for cutting of high thin bladed grass vegetations and wood undergrowth
height of 80 cm in maintained
areas. The areas must not feature any solid items in the growth or rough terrain. The brush cutter
is not
intended
for park landscaping.
The
Lucina MaX
brush cutter is designed as a multifunction machine, the cutting drum can be replaced with other adapters, such as
the mulching or surface cleaning ones. The recommended use of the brush cutter with other adapters is described in the instruction manual
of the adapter. The
Dorotha
brush cutter is a single-purpose machine that does not feature the adapter replacement option.
The use for purposes other than the intended purpose is, therefore, to be considered a use for an unspecified
purpose!
The machine may operate in all the inclined positions defined by the engine manufacturer in the event that the operator is able to safely
guide the machine, both in relation to himself and the surroundings.
57
Measured according to
ČSN EN 12733+A1
, Annex
B
.
58
Measured in accordance with Directive
2000/14/EC
(equivalent of Government Decree No. 9/2002 Coll.)
59
Measured according to
ČSN EN 12733+A1
, Annex
B
.
60
Only for
BDR-620DBiS
.
61
The brush cutter is not designed to cut any woody growth thicker than 5 mm! A failure to observe this policy will damage the machine.
62
The area growth must be cut and raked at least once a year!
21
R
ev
iz
e
1
0
/2
0
2
0
