VARI
❋
LITE
®
- VL2000™ S
POT
L
UMINAIRE
S
ERVICE
M
ANUAL
2 6
2 4- Ma rc h- 2 0 04
0 2 . 9 6 7 3 . 0 0 1 0 D
CAUTION: Ensure you place pliers on standoff on edge motor shaft. Do not hold
edge motor shaft with pliers, or shaft may be damaged.
Step 5. At lens barrel assembly, use pliers to hold standoff on edge motor shaft, and
using 1/4" open-ended wrench, remove 4-40 SS KEPS nut from end of motor
shaft.
Figure 2-12: Removing Nut From Edge Motor Assembly Shaft
Step 6. At side rail, disconnect edge motor wire connector from junction connector.
Figure 2-13: Disconnecting Edge Motor Wiring
Standoff on Edge Motor Shaft
4-40 SS KEPS Nut
Lens Barrel
Assembly
Junction Connector
Summary of Contents for VL2000
