Vari Lite VL2000, Service Manual

Page: 36 / 190

VARI ❋ LITE ® - VL2000™ S
POT
L
UMINAIRE
S
ERVICE
M
ANUAL
1 8 2 4- Ma rc h- 2 0 04 0 2 . 9 6 7 3 . 0 0 1 0 D
Color/Gobo/Link Iris Bulkhead Replacement
Parts:
21.9667.0131 1 EA ASSY, COLOR/GOBO/LINK IRIS BULKHEAD
VL2201
21.9673.0131 1 EA ASSY, COLOR/GOBO/LINK IRIS BULKHEAD
VL2202
Tools:
Screwdriver, #2 Phillips
To remove and replace color/gobo/link iris bulkhead:
Step 1. Disconnect luminaire AC input cable from power source.
Step 2. At head cover, turn two captive screws one-quarter turn and remove cover. (It
will remain attached by tether.) Figure 2-5 .
Step 3. At color/gobo/link iris bulkhead, disconnect wiring harness connectors from
color wheel motor, iris motor, and color sensor. (Remaining motor and sensor
connections will have to be disconnected in Step 5.)
Step 4. At color/gobo/link iris bulkhead, turn captive screw one-quarter turn to
release bulkhead.
Step 5. Slide bulkhead partially out of head assembly and disconnect gobo wheel
motor and gobo sensor connectors.
Step 6. Remove bulkhead from head assembly.
Figure 2-5: Color/Gobo/Link Iris Bulkhead Replacement
Step 7. Install replacement assembly by performing Steps 2–6 in reverse order.
Captive
Screws
Removable
Cover
Color/Gobo/Link
Iris Bulkhead
Wiring Harness Connector