M
ENU
S
YSTEM
: O
PERATION
4
0 2 . 9 6 7 3 . 0 0 0 1 D
02-M ay- 03
59
MODE
DMX Mode
Accesses functions for setting DMX mode to standard or enhanced 8-bit or
16-bit.
Modl
Model
Displays model number of luminaire. For example, 2413 (VL2413).
Move
Move
Enables and disables pan and tilt movement and auto-correction.
MSEQ
Master Sequence
A sequence playback mode which will replay the cues from the master
luminaire.
NoPg
No Program
Indicates that there is no software present in the luminaire.
OFF
Off
Turns off a function.
OK
Okay
Indicates that luminaire is ready to accept commands.
OK?
Okay?
Prompt for pressing [Enter] before an action is executed.
ON
On Indefinitely
Sets Menu Display to stay on until programmed otherwise (
DisP
), turns on
a function, or turns on a menu item.
P UP
Lamp Power Up
Accesses options for lamp power up: on, off, or after calibration.
P/T
Pan/Tilt
Accesses pan and tilt options for DMX function, system configuration, and
testing.
Pan
Pan
Specifies pan function for manual control (
Man
) or pan encoder for testing
(
Test
).
PASS
Test Pass
Indicates that sensor test has passed.
PCue
Play Cue
Accesses cue list for play back of cues by number.
POWR
Lamp Power
Accesses function to turn lamp on or off.
PSEQ
Play Sequence
Plays back cue sequence. Press [Enter] to start and [Menu] to stop.
RDef
Reset Default
Resets default system configuration values.
RGob
Rotating Gobo
Tests rotating gobo wheel.
RHrs
Reset Lamp Info
Resets lamp hour and lamp strike counters. For use when new lamp is
installed.
RTST
Run-Test
Indicates that a system mechanism test is in progress.
Sens
Sensors
Accesses sensor choices for diagnostic testing.
SEQ
Sequence Play-
back
Sets sequence playback mode to Individual (plays cues from each lumi-
naire) or Master (all luminaires play same cue).
STAT
Status/Error Dis-
play
Allows scrolling through error list or displays
OK
if no errors.
Stor
Store Cue
Stores cue by number. Cue number stored is dependent on next cue ID in
cue list since this field is not editable.
Str
Strobe
Specifies strobe function for manual control.
Strk
Strike
Displays total number of lamp strikes.
STST
Sensor Test
Indicates that a system sensor test is in progress.
SWAP
Swap
Swaps pan and tilt functions for special focus requirements such as moving
mirror mechanisms.
Test
System Tests
Accesses diagnostic tests for internal mechanisms.
Table 4-2: Menu Fuction Definitions (Continued)
Display
Definition
Purpose
www.carlosmendoza.com.mx
