www.vareximaging.com
9
1313DXT-I/1515DXT-I/2520DX-I/3030DX-I X-ray Detectors
U
SER
M
ANUAL
8.3.1
Cables
For illustration purposes only, detector is representative of the family of detectors.
Figure 4
Cable Connections
Table 6
Cable Names & Descriptions
Number
Cable
Description
1
Power Supply
Provides power to the detector. See
for detector DC
power requirements.
2
Mains
AC Power Cord
3
Receptor Sync to Gen-
erator
Provides the user with a means to synchronize the end-user
system-level application with the detector. This connector provides
the connections for two opto-isolated signals, one output and one
input. See
.
4
Detector Cable
Terminates into two separate connections, providing a link from
the detector to the power supply and to the user’s
X-ray generator equipment.
5
Gigabit Ethernet Cable
Connects to the NIC card on the user’s workstation and provides
interface between the user’s workstation and the detector.
6
LED 1
Power indicator, if User_Sync is applied the LED will blink at the
User_Sync frame rate.
7
LED 2
Acquisition frame rate indicator, if Internal Sync is selected the
LED will flash at the Internal Sync frame rate. If User_Sync is
selected, the LED will flash at the User_Sync frame rate (should
match LED 1).