Varec RS-232, Installation And Operation Manual

Page: 19 / 42

Wireless Field Transceiver
Varec, Inc. 11
2.5.4 Configuring radios
To configure the radios, do the following:
• Configure all slave/repeater radios
This is most easily done on the bench; however, radios may be programmed in the field if
necessary. Refer to the FreeWave ToolSuite Manual for more information.
• Verify that there is a proper communications link to the master.
2.5.5 Installing cables and antennas properly
To properly install cables and antennas, ensure that:
• There are no major bends in the RF cables
• All RF connections are secure and waterproof
2.5.6 Surge protection
Caution Surges caused by near or direct lightning strikes can severely damage the
equipment.
Varec recommends installing surge protection on any exterior antenna or antenna cables.