8
Fig. 4
5.2. Set the machine upright according to Fig.4. Hold the upper part of handle tightly with one hand while the
other pulls the pulling handle of starter for over 50cm quickly. Do not let the pulling handle go back freely in
repeated pulling but hold it tightly to avoid injury resulting from quick resilience.
5.3. Start the gasoline engine and then open air door completely. After idle operation of 5 minutes, start normal
work.
6 Operation
6.1 After the gasoline engine is started, first carry out idle operation of 5 minutes to warm up the machine.
6.2 When the gasoline engine is warmed up, press throttle handle to the appropriate regulatory position
according to the required impact energy.
Note: The new gasoline pile driver use shall mainly boast low or medium-speed for work in the first 20 hours
of operation and the maximum throttle shall not be used in order to extend the service life.
6.3. Operating speed of gasoline engine shall be at medium speed.
Fuel Bubble
Start
Handle
Summary of Contents for JH95GPD
