Vaporfi VEX 75 TC, Manual

Page: 5 / 18

5
www.vaporfi.com
TCR (M1, M2, M3):
TCR SETUP:
The VEX 75w TC mod offers the TCR function, which enables users to customize their
temperature control atomizers (Ni, Ti, SS). To enter TCR mode, press the power
button three times, once you have entered the mode menu, press the + button until
you see the TCR mode. While the mode is still flashing you can press the – button to
scroll through the set memories (M1, M2, M3), once entered only the memory setting
will flash. Now press the + button to choose a memory and follow that by pressing the
power button to confirm.
With the device turned off, hold the power button and + button for five seconds.
Once you have entered the TCR menu, press the + or - button to choose a memory.
You will then press the power button to enter your parameter setting. Press the + or -
button to set the parameter for your atomizer. Then hold the fire button to confirm.
BYPASS MODE:
Bypass Mode is a direct output mode of voltage. This mode can only be used with
atomizer resistances under the range of 0.15-3.5 ohms; otherwise the device will not
work properly. Press the power button three times to enter the menu. Press the + until
you enter bypass mode and press the power button to confirm.