Vaporfi VAIO 75 TC, Manual

Page: 8 / 21

8
www.vaporfi.com
When replacing your atomizer, especially from a nickel atomizer to a temperature
controlled atomizer (Ni, Ti, SS 316), you will be required to reset the resistance of that
atomizer. This helps the device recognize that the new atomizer is to be used at room
temperature, which ensures that you will not experience a burnt hit, if properly primed.
When prompted press the + button to indicate that the replacement atomizer is new. If
you are using the same atomizer and are prompted, press the – button indicating that
the atomizer is the same.
2. LOCK/UNLOCK IN TEMPERATURE MODE
When using an atomizer in temperature control, to ensure that your atomizer is read at
the correct base resistance, you have the ability to lock your resistance. Press the power
button three times to enter the menu. Then press the – button to enter the second row
of your display, you will notice the resistance display is now blinking. Now, press the +
button to lock the resistance.
3. CHANGING THE LED COLOR
While the device is on, hold the power and + buttons to enter the led color menu. Press
the – button to choose your color and press the power button to confirm.
Note: It is important to unlock your atomizer’s resistance before replacing the atomizer.
This will ensure that the new atomizer is installed at room temperature.
4. KEY LOCK
While the device is on, hold the + and – buttons to enter key lock mode. While in this
mode, you will be unable to change the wattage/temperature, but will still be able to fire.