Vaporfi V-GRIP, Quick Start Manual

Page: 7 / 20

EXTRA FEATURES
NEW COIL/SAME COIL PROMPT:
When replacing your atomizer, especially from a nickel atomizer to a
temperature controlled atomizer (Ni, Ti, SS 316), you will be required
to reset the resistance of that atomizer. This helps the device
recognize that the new atomizer is to be used at room temperature,
which ensures that you will not experience a burnt hit, if properly
primed. When prompted press the + button to indicate that the
replacement atomizer is new. If you are using the same atomizer,
select old.
be used with atomizer resistances under the range of 0.15-3.5 ohms;
otherwise the device will not work properly. Press the fire bar three
times to enter the menu. Press the + until you enter bypass mode and
press the fire bar to confirm.