1. Replace the Pod
- Take out the used POD from the
battery;
- Install a new POD to the battery and
make sure they are firmly connected.
2. Fill the E-liquid
- Take out the used POD from the
battery and pull out the silicone plug
from the bottom of the POD;
- Fill e-liquid through the hole
- Put the silicone plug back in place
firmly after filling is finished.
- Please wait 5 minutes for the e-liquid
to soak into the coil completely.
- To ensure the vaping experience,
please add the e-liquid when it is lower
than the silicone at the bottom of the
pod.
* Refer to the figure 1 above.
* For better vaping experience
,
please
refill the e-liquid before it is lower
than the silicone at the bottom of the
pod.
* Refer to the figure 2 above.
3. Adjust Airflow
Rotate the Pod to adjust the airflow.
Adjust the toggle according to your
vaping habits for different airflow
effects.
* Refer to the figure 3 above.
4. Start Vaping
Inhale directly through the mouthpiece
and exhale to start vaping.
5. Battery Level
Low Resistance/Short-circuit: The red
indicator will flash 5 times and the
device will stop working.
High Temperature: The red indicator
will flash 6 times and the device will
stop working.
No Load/High Resistance: The current
LED Color
Battery Status
Green
70%-100%
Blue
20-70%
Red
0~20%
6. Charge the Battery
Please use the Type-C cable to charge
the device. The LED indicator shows the
current battery level during charging
and remains green when the device is
fully charged, and stop charging after
10 minutes.
USE INSTRUCTIONS
PROTECTIONS
1. Do not leave the charging device
unattended.
2. Do not drop, throw or abuse your
device, which may cause damage.
3. Please use a standard USB output
charger with proper charging current
and voltage range.
4. Keep away from the water or any
flammable gas, liquid.
5. Do not expose the device to direct
sunlight, dust, moisture or mechanical
shock.
6. Do not expose the device to extreme
temperature.
(Recommended temperature range:
-10~60
℃
/ 14~140
℉
using and -10~45
℃
/ 14~113
℉
while storing).
7. EEE Recycling: the product should
not be treated as household waste,
instead, it should be handed over to
the applicable collection point for the
recycling of electrical and electronic
equipment.
8. Battery Recycling: the product
battery should not be treated as
household waste, instead, it should be
handed over to the applicable used
battery collection point for recycling.
9. Only have your device repaired by
VAPORESSO. Do not attempt to repair
it by yourself as damage or personal
injury may occur.
CAUTIONS
battery level indicator will flash 4 times
and the device will stop working.
Low Voltage/Over Discharging: The
red indicator will flash 3 times and the
device will stop working.
Over Charging: The green indicator
will turn off and the device will stop
charging.
Overtimes(8s): The current power
indicator LED will flash 4 times,then
breathe once and the device will stop
working.
WARNINGS
This refillable electronic cigarette
is intended for use with compatible
e-liquid, which may contain nicotine.
Nicotine is an addictive substance and
it is not suitable or recommended to
use in following cases:
1. This device is not suitable for:
- Persons under the legal smoking age.
- Persons experiencing heart disease,
stomach or duodenal ulcers, liver or
kidney problems, long-term throat
disease or difficult breathing due to
bronchitis, emphysema or asthma.
