Vapor Clean PRO7 HOME PLUS, Instruction Manual For Operation And Maintenance

Page: 10 / 38

4
An improper extension cord may also be dangerous
they may be damaged!
Do not pull by the the machine steam hose or the power cord,
ing any maintenance.
• The appliance should be disconnected from the power supply before perform-
• Only original spare parts should be used to ensure the safety of this appliance.
• Children and untrained users should not use this appliance.
immediately!
• In the event of foam or liquid leaks from the bottom of the machine, turn it off
power demands, and also the plug and socket should be watertight.
• If an extension cord is used, the cable cross section should be sufficient for the
facturer or by an authorized person.
• If the power cable is damaged it should be replaced immediately by the manu-
fumes, or burning materials: there is danger of explosion and fire!
• Do not vacuum flammable substances (petrol, solvents, paints, etc.), welding
can overheat.
• Take care when touching external surfaces of the appliance during use, they
• Be careful not to touch the nozzles, they become very hot when using steam.
• Do not use the appliance near other people.
the steam jet towards people.
• the high pressure steam jet can be dangerous if used improperly. Never direct
served:
During use, the following minimum operating instructions should always be ob-
WARNINGS AND SAFETY DURING USE
IPX4 protection.
Electronic control of boiler level.
Electronic control of power.
Performing a control self-test at each start-up.
hose).
Low voltage in the handle (safety voltage used for the connection within the
abnormally high pressure in the boiler).
700 kPa (7 bar) safety valve (it allows the exhaust of excess steam in the event of
event of excessive temperature)
175°C automatic ceramic thermostat (located under the boiler, it operates in the
excessive temperature)
185°C “one shot” thermostat (located under the boiler, operates in the event of
SAFETY