WARNINGS
• Battery setting display: Red LED flashes 3 times
• Battery reverse connection protection: When the battery is installed
reversely, the device does not work to avoid the damage from short
circuit.
• Working display: Red LED lights up
• Short circuit protection: Red LED flashes 4 times
• High resistance protection: Red LED flashes 5 times
• Atomizer protection: When vaping longer than 10 seconds, the
device stops output automatically and LED flashes 10 times
• Low Voltage protection: When the voltage is lower than 3.3V, red LED
flashes 3 times and stop working.
ABOUT THE CHARGER
•
Charger requirements and functions:
1. It takes Micro USB DC 5V as input, independent single groove
charging and management system.
2. It provides 2 kinds of charging current options (500mA/1000mA).
3. The LED screen shows the charging conditions (25% / 50% / 75% /
100%).
4. It can distinguish Li-ion Battery and NI-MH battery; choose LiFepo4
battery manually.
5. It has 0V voltage activating function.
6. It has over charge protection, over discharge protection, bad
battery intelligent recognition and reverse connection protection.
7. The charging method is constant current and constant voltage.
8. It takes DC input, the working power supply of the charger is 5V-
1A (Micro plug)
9. It comes with 5V - 1000mA
USB automatic recognition output function.
•
Buttons and the functions
1. There is a SELECT button
on the charger, choose
the charging current, press
the SELECT button for 2
seconds to switch between
0.5A and1A in any condition.
You can press the SELECT
button slightly to choose
the battery to charge, it
enters the charging mode
when the battery type is
selected.
2. Connect the charger to 5V
power supply, all LED on the charger light up. The 0.5A LED shows
when there is no battery in the charging grooves.
3. When the charger is connected to battery, it can distinguish Li-ion
Battery 3.7V and NI-MH battery 1.2V. When it is connected to Li-
ion battery, it starts to charge after it recognize it and shows 1.2V, it
means it is a broken battery. Or when the battery type can not be
recognized, it mean it is a broken battery.
4. LiFepo4 battery 3.2V and Li-ion battery 3.85V need to be selected
manually, it enters charging mode 5 seconds after the battery type
is selected. When the system default charging, you can click the
SELECT button slightly to check the battery type.
• Electric specs
1. Input power: Micro USB DC5V/1A
2. Output voltage: 4.2V±1%/5V
3. Output current: 500mA/1000mA
4. constant charging, cut off current: <100mA
5. External power standby current: <15.0mA
•
USB output functions:
1. USB port output no-load voltage: 4.90-5.30V
2. Output Current: 1000mA
3. No-load current: <1mA
•
Compatible batteries
Li-ion/IMR:18650, 18490, 18350, 17670, 17500, 16340 (RCR123), 14500,
10440
•
Charger specs
1. Size: 113x38x32mm
2. Weight: 45g (battery and charging cable not included)
4
100%
Li-ion
3.8V
Li-Fe
3.2V
Li-ion
3.7V
Ni-MH
1.2V
75%
0.5A
1A
50%
25%
SELECT
Summary of Contents for vPipe III
Page 1: ...Manual ...
Page 2: ...9 VPIPE III HANDBUCH ...
