The event detection is triggered by G-Sensor (Gravity Sensor), it
auto detects possible accident collisions, locks up the current loop
recording video clip and saves the footage in the Event folder so
it would not be over-written when the card is full.
The G-Sensor sensibility is adjustable, it is Medium by default, but
you could adjust to Low or High or turn it Off in “Record Setup”>
“G-Sensor Set”.
You could also lock a video footage manually, when the camera
is recording, press the Emergency Button. A key icon will appear
on the center of the screen.
4.5 Event recording
While recording, the LED indicator is blinking blue, and a red dot will
flash on the top left of the screen. You can stop/start the recording
by pressing the Confirm button.
- 11 -
By default, the loop recording time is 3mins. Please go to “Record
Setup”>“Loop Recording” to change to 1 min, 3 mins, or 5mins for
your need. When it turns off, the camera will record video in 30 mins
per clip, but would not over write the old videos when the card is full.
The loop recording video is named by “Year_Date_Time_Serial”
(for example, “2017_0101_060101_001”) format and stored in
“Video”>“Normal” folder. When the microSD card is full, the camera
will write over the old files with new recording.
HDR
HDR
(G)
(G)
1440FHD
00：12：34
12：34：56
12/01/2017
5
5
5
5
+ 0
-
