Vantron
| Embedded in your success, Embedded in your better life
World-leading provider of embedded/IoT products and solutions
VT-SOM-I500P-EVB | User Manual 11
2.1
I/O Layout
2.2
Connecting the Evaluation Board
The VT-SOM-I500P module will be installed on the Evaluation Board before shipment.
Please follow the steps below to finish hardware connection and power up the Evaluation
Board.
1.
Unpack the device;
2.
Insert an activated SIM card, if any, into the SIM slot;
3.
Connect VT-SOM-I500P-EVB to a host PC with a USB Type-C cable;
4.
Connect a display/touch screen to the Evaluation Board via the MIPI DSI connector
/HDMI interface/TP connector;
5.
Short press the power button to turn on the display/touch screen;
6.
Test/explore the Evaluation Board with the touch screen.
(19) TP
(14) AMP & SPK
(20) NFC
(5) MIPI CSI for
front camera
(4) MIPI DSI
(2) USB
Type-C
(6) MIPI CSI for
rear camera
(7) Mic
(21) Vol +
(22) Vol -
(23)
PWR
(24)
RST
(12)
Debug
(18) RTC
(16) SIM slot
(15) Audio jack
(13) SD slot
(11) UART
(8) Mic
(10)
Vibrator
(1) Power jack
(3) HDMI
(9) Battery
connector
(17) SOM
