Vantron
| Embedded in your success, Embedded in your better life
World-leading provider of embedded/IoT products and solutions
VT-MITX-TGL | User Manual 29
www.vantrontech.com
3.1
BIOS Introduction
BIOS initializes hardware like CPU and memory, and saves hardware settings for installation
and loading of the operating system (OS).
Users may need to run BIOS Setup program when:
An error message appears suggesting that the user should run BIOS Setup;
Default settings need to be customized.
Please be aware that BIOS will be under continuous update for better system
performance, therefore the description in this chapter might vary slightly and is for
reference only.
3.2
BIOS Setup
3.2.1
Entering Setup
Power on the Board and the system will start the power-on self-test process. Then press
F2
to enter the BIOS configuration page where BIOS version is available.
The configuration page features the following in the menu bar:
Platform Information Menu
: Basic system configurations, like BIOS version, processor
information, firmware version, system language, system time and date
Advanced
: Advanced configurations that allow users to customize the system
Security
: System security settings where users can set supervisor passwords, make
TPM configurations, etc.
Boot
: System boot options
Exit
: BIOS load or exit options with or without changes saved
