Vantron
| Embedded in your success, Embedded in your better life
World-leading provider of embedded/IoT products and solutions
Vantron | C335 Series User Manual
40
3.3.3 WAN Setting – Client
Client
:
ETH0
and
ETH1
are bounded with the network bridge (br-lan).
WiFi Client
is
designed as the WAN port to connect the higher-level network.
Client
setup procedures:
Step 1: Select
Client
for
WAN Protocol
;
Step 2: Click to switch the protocol
Client
;
Step 3: Select the Wi-Fi network that the Gateway is to connect;
Step 4: Click
Scan WIFI
to refresh the Wi-Fi list if the target Wi-Fi network is not identified;
Step 5: Select the MAC address of the AP to be connected (leave it to Auto if not certain);
Step 6: Enter the password of the Wi-Fi network to be connected;
Step 7: Confirm if the Wi-Fi network is accessible. If not, select
No
as the heartbeat
detection method might be different;
Step 8: Select the protocol for IP addressing (DHCP by default);
Step 9: Click
Save & Apply
.
