Prepare your computer case for installation.
2.
Locate an available 3.5” or 5.25” drive bay where you would like
to install the device.
3.
5.25” Drive Bay
3.5” Drive Bay
*Using Optional 3.5” to 5.25” Front Bay Converter Kit (HDA-525P) to install into a 5.25” Front Bay
Slide the front panel device into your case until the front panel
is flush with the front of your case.
1b.
Secure the 5.25” front panel device to your computer case with
the provided screws.
2b.
Proceed to connect the front panel device to your system’s
motherboard or expansion card.
3b.
Connect to
System 20 pin
USB 3.0 Header
Connect to
System Audio
port Header
Connect to
System SATA
port Header
Proceed to connect the front panel device to your system’s
motherboard or expansion card.
3a.
Secure the 3.5” front panel device to your computer case with
the provided screws.
2a.
Slide the front panel device into your case until the front panel
is flush with the front of your case.
1a.
3.5” Front Panel Installation
Connect to
System 20 pin
USB 3.0 Header
Connect to
System Audio
port Header
Connect to
System SATA
port Header
Installation Guide
Guía de instalación Guide d'installation Installationsanleitung
Guida all’installazione
取り付けガイド
安裝指南
安装指南
Verify the package contents.
1.
3.5” Front Panel Device
Installation Guide
Installation Screws
